6036512 WL100-P4409

Photoelectric sensors
W100, Photoelectric retro-reflective sensor, Standard optics Type WL100-P4409 Part No. 6036512 At a glance Standard miniature housing with M3 threaded mounting holes Optics with standard red LED or bright light LED Polarizing filter Light/dark switching and sensitivity adjustment via rotary switch possible All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) Your benefits Highly visible light spot simplifies alignment Less contamination due to high optical operating reserve Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching M3 threaded mounting holes provide easy installation Variants available for reliably detecting clear materials, min. attenuation 20 % All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) Product will be phased out and can be ordered until 31.12.2015.

Features
	Sensor/detection principle:	Photoelectric retro-reflective sensor, Standard optics
	Dimensions (W x H x D):	11 mm x 31 mm x 20 mm
	Housing design (light emission):	Rectangular
	Sensing range max.:	0.1 m ... 7.5 m1)
	Sensing range:	0.1 m ... 6 m2)
	Type of light:	Visible red light
	Light source:	LED3)
	Wave length:	645 nm
	Angle of dispersion:	Ca. 2 °
	Focus adjustable:	-
	Adjustment:	Potentiometer, 270 °
	Light spot size (distance):	? 150 mm (4 m)

1)2)PL80A3)Average service life of 100,000 h at TA= +25 °C

Mechanics/electronics
	Supply voltage:	10 V DC ... 30 V DC1)
	Ripple:	± 10 %2)
	Power consumption:	≤ 30 mA3)
	Output type:	PNP, open collector
	Switching mode:	Light/dark switching
	Switching mode selector:	Manually selectable
	Output current Imax.:	≤ 100 mA
	Response time:	≤ 0.5 ms4)
	Switching frequency:	1,000 Hz5)
	Connection type:	Connector M8, 4-pin
	Circuit protection:	A, B, D6)7)8)
	Weight:	9 g
	Polarisation filter:
	Special device:	-
	Optics material:	PMMA
	Enclosure rating:	IP 67
	Items supplied:	Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250
	Ambient operating temperature:	-25 °C ... +55 °C
	Ambient storage temperature:	-40 °C ... +70 °C
	UL File No.:	NRKH2.E300503 & NRKH8.E300503
	Signal voltage PNP HIGH/LOW:	UV - 1,8 V / ca. 0 V
	Housing material:	ABS/PC/POM, Plastic

1)Limit values, operation in short-circuit protected network max. 8 A2)May not exceed or fall short of VStolerances3)Without load4)Signal transit time with resistive load5)With light/dark ratio 1:16)A = VSconnections reverse-polarity protected7)B = inputs and output reverse-polarity protected8)D = outputs overcurrent and short-circuit protected