NexCOBOT TP-100-1 TM Kit

用于TM即插即用的TP-100-1是手持式操作示教器，与TM Robot集成良好，用户可以使用TP-100-1直接操作TM Robot。 TP-100-1具有符合人体工程学的外壳，带有安全元件，10.1英寸WXGA分辨率面板和Multi-Touch P-Cap。手持式控制单元使用起来***舒适，也支持左撇子。

兼容TM Robot HW3.2 / SW 1.76.6300和更新的HW / SW版本。若用户自行更新TMflow旧版至1.76.6300，Teach Pendant仍会无法使用，需洽TM协助更新

规格

Technical Data	TP-100-1	Technical Data	TP-100-1
Panel	– 10.1”, 16:10, WXGA, 1280 x 800 – Luminance: 500 cd/m2 – Contrast ratio: 800:1 – LCD color: 16.7M – Viewing angle: 85 (U), 85 (D), 85 (L), 85 (R) – Backlight: LED	Interface	– Data back-up: 2 x USB 2.0 – Control connector: HDB-44 female Removable HDB-44 control cable, including power signal, E-stop button signal, Enabling switch signal, Switch button signal, STOP signal, USB 2.0 and VGA signals
Touch	– Touch: 5 points P-Cap – Touch light transmission: 87% – Touch interface: USB – Anti-scratch surface: 7H hardness	Ratings	– Power supply voltage: 24 Vdc (19.2 to 28.8 Vdc) – Current consumption: > TP-100-VGA 0.625A at 24Vdc (max.)
Safety Elements	– Emergency stop button (2 NC channels, B10d=130,000) > Contact function: latching > Reset: by rotating – 3-position Deadman switch (3 channels 2 NO &1 NC, B10d=100,000)	Mechanical	– Dimension: 297.3 x 257.2 x 57.2 mm (78.5mm including E-stop button) – Weight (without external control cable): > TP-100-1 1.5Kg – TP-100-1 IP protection class: Full IP65 – Junction Box module and “install on TM control box” IP protection class: Full IP 32 – Teach Pendant cable length: 3m
Operating Elements	Switch button switch (1 NO, 1 NC) 6 membrane key	Environment	– Operating temperature: 0°C to 50°C – Storage temperature: -20°C to 75°C – Operating humidity: 5%~90% relative humidity, non-condensing – Vibration resistance/shock-proof/free-fall according to EN 61131-2
System	– TP-100-1: VGA input – USB 2.0 upstream	Certifications	– CE (Emission EN61000-6-4; Immunity EN61000-6-2 for installation in industrial environments) – FCC Class A

Compatibility

TP-100-1 HW	TP-100-1 SW	HW	SW
1.0	1.0.0.0	3.2 and above	1.76.6300 and above

NexCOBOT TP-100-1 TM Kit套组内容说明：

编号	项目	数量	备注
1	TP-100-1	1
2	EXTERNAL 3M CABLE WITH GROUNDING FOR TP-100-1	1	Content: (1) 3M Cable1 (2) M3 12mm screw1 (3) Seal Washers*1
3	TP-100 Holders	1
4	TP-100-VGA-JB	1	Content: (1) Junction box1 (2) O-ring 1 (3) M3 12mm screw4 (4) Cap 1 (5) Connector 2P1 (6) Connector 3P1 (7) Connector 6P*2
5	TP-100-VGA TM Plug&Play Accessory	1	Content: (1) Meta l Sheet 1 (2) Junction Wires 1 (3) R632 8mm screws *8

NexCOBOT TP-100-1手持式操作示教器_TM达明机器人

NexCOBOT TP-100-1 TM Kit