6026074 WT100-N1432

Photoelectric sensors
W100, Photoelectric proximity sensor, energetic Type WT100-N1432 Part No. 6026074 At a glance Standard miniature housing with M3 threaded mounting holes Optics with standard red LED or bright light LED Available as a background blanking sensor or as an energetic proximity sensor Light/dark switching and sensitivity adjustment via rotary switch possible (depending on type) Wide variety of accessories available (depending on type) Your benefits Highly visible light spot allows for quick and easy alignment M3 threaded mounting holes provide easy installation Product will be phased out and can be ordered until 31.12.2015.

Features
	Sensor/detection principle:	Photoelectric proximity sensor, energetic
	Dimensions (W x H x D):	11 mm x 31 mm x 20 mm
	Housing design (light emission):	Rectangular
	Sensing range max.:	0 mm ... 900 mm1)
	Sensing range:	0 mm ... 700 mm
	Type of light:	Visible red light
	Light source:	LED2)
	Wave length:	680 nm
	Angle of dispersion:	Ca. 6.8 °
	Focus adjustable:	-
	Adjustment:	Potentiometer, 270 °
	Light spot size (distance):	? 55 mm (400 mm)

1)Object with 90 % reflectance (referred to standard white, DIN 5033)2)Average service life of 100,000 h at TA= +25 °C

Mechanics/electronics
	Supply voltage:	10 V DC ... 30 V DC1)
	Residual ripple:	± 10 %2)
	Power consumption:	≤ 30 mA3)
	Output type:	NPN, open collector
	Switching mode:	Light/dark switching
	Switching mode selector:	Manually selectable
	Output current Imax.:	≤ 100 mA
	Response time:	≤ 0.5 ms4)
	Switching frequency:	1,000 Hz5)
	Connection type:	Cable, 3-wire, 2 m6)
	Cable material:	PVC
	Conductor cross-section:	0.18 mm?
	Circuit protection:	A, B, D7)8)9)
	Weight:	53 g
	Polarisation filter:	-
	Special device:	-
	Optics material:	PMMA
	Enclosure rating:	IP 65
	Ambient operating temperature:	-25 °C ... +55 °C
	Ambient storage temperature:	-40 °C ... +70 °C
	Signal voltage NPN HIGH/LOW:	Approx. VS / < 1.8 V
	Housing material:	ABS/PC/POM, Plastic

1)Limit values, operation in short-circuit protected network max. 8 A2)May not exceed or fall short of VStolerances3)Without load4)Signal transit time with resistive load5)With light/dark ratio 1:16)Do not bend below 0 °C7)A = VSconnections reverse-polarity protected8)B = inputs and output reverse-polarity protected9)D = outputs overcurrent and short-circuit protected