Photoelectric sensors | ||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 12 mm x 31.5 mm x 21 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | ≤ 6 m1) | ||
Sensing range: | ≤ 5 m2) | ||
Type of light: | Visible red light | ||
Light source: | PinPoint LED3) | ||
Wave length: | 650 nm | ||
Light spot size (distance): | ? 8 mm (350 mm) |
1)2)PL80A3)Average service life of 100,000 h at TA= +25 °C |
Mechanics/electronics | |||
Supply voltage: | 10 V DC ... 30 V DC1) | ||
Residual ripple: | ± 10 %2) | ||
Power consumption: | ≤ 30 mA3) | ||
Output type: | PNP | ||
Switching mode: | Light/dark switching | ||
Switching mode selector: | Selectable via light/dark selector | ||
Output current Imax.: | ≤ 100 mA4) | ||
Response time: | < 625 ?s5) | ||
Switching frequency: | 1,000 Hz6) | ||
Connection type: | Cable, 3-wire, 3 m7) | ||
Cable material: | PVC | ||
Conductor cross-section: | 0.14 mm? | ||
Circuit protection: | A, B, D8)9)10) | ||
Protection class: | III | ||
Weight: | 80 g | ||
Polarisation filter: | |||
Optics material: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C11) | ||
Ambient storage temperature: | -40 °C ... +70 °C | ||
UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
Signal voltage PNP HIGH/LOW: | VS - (≤ 3 V) / approx. 0 V | ||
Housing material: | ABS/PC, Plastic |
1)Limit values, operation in short-circuit protected network max. 8 A2)May not exceed or fall short of VStolerances3)Without load4)At Vs > 24 V, IAmax = 50 mA5)Signal transit time with resistive load6)With light/dark ratio 1:17)Do not bend below 0 °C8)A = VSconnections reverse-polarity protected9)B = inputs and output reverse-polarity protected10)D = outputs overcurrent and short-circuit protected11)Temperature stability after adjustment +/-10°C |