1050706 GL6-P4111

Photoelectric sensors
G6, Photoelectric retro-reflective sensor, Standard optics Type GL6-P4111 Part No. 1050706 At a glance PinPoint LED for a bright, precise light spot Durable meta l threaded inserts SICK ASIC technology - the result of decades of experience in photoelectric sensors Large, user-friendly potentiometer Large, bright indicator LEDs IP 67 enclosure rating Your benefits Easy alignment and precise object detection due to a highly visible PinPoint LED Quick and easy mounting and high durability due to threaded meta l inserts SICK ASIC technology provides high performance, excellent reliability and crosstalk immunity Easy to adjust due to large, user-friendly potentiometers Easy to monitor due to large, bright indicator LEDs Easy installation with SICK accessories

Features
	Sensor/detection principle:	Photoelectric retro-reflective sensor, Standard optics
	Dimensions (W x H x D):	12 mm x 31.5 mm x 21 mm
	Housing design (light emission):	Rectangular
	Sensing range max.:	≤ 6 m1)
	Sensing range:	≤ 5 m2)
	Type of light:	Visible red light
	Light source:	PinPoint LED3)
	Wave length:	650 nm
	Light spot size (distance):	? 8 mm (350 mm)

1)2)PL80A3)Average service life of 100,000 h at TA= +25 °C

Mechanics/electronics
	Supply voltage:	10 V DC ... 30 V DC1)
	Residual ripple:	± 10 %2)
	Power consumption:	≤ 30 mA3)
	Output type:	PNP
	Switching mode:	Light/dark switching
	Switching mode selector:	Selectable via light/dark selector
	Output current Imax.:	≤ 100 mA4)
	Response time:	< 625 ?s5)
	Switching frequency:	1,000 Hz6)
	Connection type:	Connector M8, 4-pin
	Circuit protection:	A, B, D7)8)9)
	Protection class:	III
	Weight:	20 g
	Polarisation filter:
	Special device:	-
	Optics material:	PMMA
	Enclosure rating:	IP 67
	Ambient operating temperature:	-25 °C ... +55 °C10)
	Ambient storage temperature:	-40 °C ... +70 °C
	UL File No.:	NRKH.E348498 & NRKH7.E348498
	Signal voltage PNP HIGH/LOW:	VS - (≤ 3 V) / approx. 0 V
	Housing material:	ABS/PC, Plastic

1)Limit values, operation in short-circuit protected network max. 8 A2)May not exceed or fall short of VStolerances3)Without load4)At Vs > 24 V, IAmax = 50 mA5)Signal transit time with resistive load6)With light/dark ratio 1:17)A = VSconnections reverse-polarity protected8)B = inputs and output reverse-polarity protected9)D = outputs overcurrent and short-circuit protected10)Temperature stability after adjustment +/-10°C