Photoelectric sensors | ||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||
Features | |||
Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
Dimensions (W x H x D): | 7.7 mm x 21.8 mm x 13.5 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 1 mm ... 18 mm1) | ||
Sensing range: | 4 mm ... 15 mm2) | ||
Type of light: | Visible red light | ||
Light source: | PinPoint LED3) | ||
Wave length: | 640 nm | ||
Light spot size (distance): | ? 2 mm (8 mm) | ||
Background suppression typ. from: | 20 mm |
1)Object with 90 % reflectance (referred to standard white, DIN 5033)2)Object with 6 % remission3)Average service life of 100,000 h at TA= +25 °C |
Mechanics/electronics | |||
Supply voltage: | 10 V DC ... 30 V DC1) | ||
Residual ripple: | ≤ 5 Vpp2) | ||
Power consumption: | ≤ 20 mA3) | ||
Output type: | PNP | ||
Switching mode: | Dark switching | ||
Output current Imax.: | < 50 mA | ||
Response time: | < 0.6 ms4) | ||
Switching frequency: | 800 Hz5) | ||
Connection type: | Cable with connector M8, 3-pin, 200 mm6) | ||
Cable diameter: | ? 3 mm | ||
Circuit protection: | A, C, D7)8)9) | ||
Optics material: | PMMA | ||
Enclosure rating: | IP 67 | ||
Ambient operating temperature: | -25 °C ... +50 °C | ||
Ambient storage temperature: | -40 °C ... +75 °C | ||
UL File No.: | NRKH.E181493 | ||
Housing material: | ABS, Plastic |
1)Limit values, operation in short-circuit protected network max. 8 A2)May not exceed or fall short of VStolerances3)Without load4)Signal transit time with resistive load5)With light/dark ratio 1:16)Do not bend below 0 °C7)A = VSconnections reverse-polarity protected8)C = interference suppression9)D = outputs overcurrent and short-circuit protected |