施耐德接触器LC1D32M7C

主要信息
产品系列
TeSys
产品名称
D
产品类型
接触器
产品短名
LC1D
产品简称
LC1D32
接触器应用领域
应用于功率因数大于等于0.95的交流负载中
应用于接通分断正常启动的鼠笼电机
使用类别
AC-4
AC-3
AC-1
极数
3P
power pole contact composition
3 NO
额定工作电流 [Ie]
32 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
50 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
控制回路电压
220 V AC 50/60 Hz
辅助触点类型
1 NO + 1 NC
补充信息
额定工作电压 [Ue]
Power circuit: <= 690 V AC 25...400 Hz
Power circuit: <= 225 V DC
电动机功率 (kW)
18.5 kW 在…上 500 V AC 50/60 Hz (AC-3)
7.5 kW 在…上 220/240 V AC 50/60 Hz (AC-3)
15 kW 在…上 380/400 V AC 50/60 Hz (AC-3)
15 kW 在…上 415/440 V AC 50/60 Hz (AC-3)
18.5 kW 在…上 660/690 V AC 50/60 Hz (AC-3)
7.5 kW 在…上 400 V AC 50/60 Hz (AC-4)
电气寿命
1.4 Mcycles 50 A AC-1 at Ue <= 440 V
1.6 Mcycles 32 A AC-3 Ue条件下 <= 440 V
2.6 Mcycles 22 A AC-3 Ue条件下 660/690 V
机械寿命
15 Mcycles
***大操作频率
3600 cyc/h 60 °C
动作时间
12...22 ms closing
4...19 ms opening
控制电压限额
Drop-out: 0.3...0.6 Uc at 50/60 Hz (at <60 °C)
Operational: 0.8...1.1 Uc at 50 Hz (at <60 °C)
Operational: 0.85...1.1 Uc at 60 Hz (at <60 °C)
(~50Hz保持)功耗 (VA)
7.5 VA 60 Hz cos phi 0.3 (at 20 °C)
7 VA 50 Hz cos phi 0.3 (at 20 °C)
约定发热电流 [Ith]
10 A (at 60 °C) for signalling circuit
50 A (at 60 °C) for power circuit
平均阻抗
2 mOhm - Ith 50 A 50 Hz for power circuit
热消散
2…3 W at 50/60 Hz
额定短时耐受电流 [Icw]
260 A 40 °C - 10 s for power circuit
430 A 40 °C - 1 s for power circuit
60 A 40 °C - 10 min for power circuit
138 A 40 °C - 1 min for power circuit
100 A - 1 s for signalling circuit
120 A - 500 ms for signalling circuit
140 A - 100 ms for signalling circuit
与继电器配合使用的熔丝
10 A gG for signalling circuit conforming to IEC 60947-5-1
63 A gG at <= 690 V coordination type 1 for power circuit
63 A gG at <= 690 V coordination type 2 for power circuit
过电压类别
III
额定绝缘电压 [Ui]
Power circuit: 690 V conforming to IEC 60947-4-1
Signalling circuit: 690 V conforming to IEC 60947-1
浪涌抑制模块
无内置浪涌抑制模块
辅助触点类型
type mechanically link ed 1 NO + 1 NC conforming to IEC 60947-5-1
type mirror contact 1 NC conforming to IEC 60947-4-1
信号回路频率
25...400 Hz
***小开关电流 [Imin]
5 mA for signalling circuit
不重迭时间
1.5 ms on de-energisation between NC and NO contact
1.5 ms on energisation between NC and NO contact
绝缘电阻
> 10 MOhm for signalling circuit
安装方式
导轨安装
底板安装
接线能力
Control circuit: screw clamp terminals 1 1…4 mm? - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 2 1…4 mm? - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 1 1…4 mm? - cable stiffness: flexible with cable end
控制回路: 螺栓紧固 2 1…2.5 mm? 电缆选型: 软线 带篐线端子
Control circuit: screw clamp terminals 1 1…4 mm? - cable stiffness: solid without cable end
Control circuit: screw clamp terminals 2 1…4 mm? - cable stiffness: solid without cable end
电源回路: 螺栓紧固 1 2.5…10 mm? 接线片外径?: 10 mm 电缆选型: 软线 不带篐线端子
电源回路: 螺栓紧固 2 2.5…10 mm? 接线片外径?: 10 mm 电缆选型: 软线 不带篐线端子
电源回路: 螺栓紧固 1 1…10 mm? 接线片外径?: 10 mm 电缆选型: 软线 带篐线端子
电源回路: 螺栓紧固 2 1.5…6 mm? 接线片外径?: 10 mm 电缆选型: 软线 带篐线端子
电源回路: 螺栓紧固 1 1.5…10 mm? 接线片外径?: 10 mm 电缆选型: 硬线 不带篐线端子
电源回路: 螺栓紧固 2 2.5…10 mm? 接线片外径?: 10 mm 电缆选型: 硬线 不带篐线端子
紧固扭矩
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat ? 6 mm
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
Power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver flat ? 6 mm
Power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver Philips No 2
电源回路: 2.5 N.m 通过 电缆连接器 用螺丝刀 ? 6 平口 螺丝: M4
电源回路: 2.5 N.m 通过 电缆连接器 用螺丝刀 No 2 十字螺丝 螺丝: M4
高度
85 mm
宽度
45 mm
深度
92 mm
控制回路特性
AC at 50/60 Hz
额定冲击耐受电压 [Uimp]
6 kV conforming to IEC 60947
safety cover
无
(~50Hz吸合)功耗 (VA)
70 VA 60 Hz cos phi 0.75 (at 20 °C)
70 VA 50 Hz cos phi 0.75 (at 20 °C)
产品净重
0.375 kg
接触器兼容特性
M2
型号
LC1D
环境
符合标准
IEC 60947-4-1
GB 14048.4
产品认证
CCC
污染等级
3
防护措施
TH conforming to IEC 60068-2-30
IP 保护等级
IP2x front face for main circuit conforming to IEC 60529
IP2x front face for coil circuit conforming to IEC 60529
运行温度
-40…60 °C
贮存环境温度
-60…80 °C
周围空气温度
60…70 °C at Uc
工作海拔
3000 m without derating
耐火及耐异常高温能力
850 °C conforming to IEC 60695-2-11
抗冲击、震动性能
Vibrations contactor open (2 Gn, 5...300 Hz) conforming to IEC 60068-2-6
Vibrations contactor closed (4 Gn, 5...300 Hz) conforming to IEC 60068-2-6
Shocks 11 ms contactor closed (15 gn) conforming to IEC 60068-2-27
抗冲击性能 11 ms 触头打开 (8 gn) 符合 IEC 60068-2-27
质量标识
CE 声明