德国倍加福恒力开度仪ECA10TL-Analog

技术参数倍加福恒力开度仪ECA10TL - Analog

产品阐述
Cable pull rotary encoder with analog interface

一般特性
检测类型		磁式采样方式
设备类型		Target line with analog interface
测量范围		3000 ... 10000 mm
外壳类型		80 mm, 130 mm, 190 mm
分辨率		Cable pull: 80 mm design: 0.056 mm 130 mm design: 0.094 mm 190 mm design: 0.135 mm Encoder: 16 bit (12 bit/revolution)
功能安全性参数
B10d		300000
电气特性
工作电压		12 ... 30 V DC , PELV
电流消耗		typ. 15 mA
输入 1
输入类型		lower limit of measurement range
信号电压
	高	12 ... 30 V DC
输入 2
输入类型		upper limit of measurement range
信号电压
	高	12 ... 30 V DC
模拟量输出
输出类型		analog output, current or analog output, voltage
缺省设置		rising ramp at ccw rotation
线性误差		≤ 0.15 %
连接器
连接器		M12 连接器，5 pin
电缆		?6 mm, 4 x 2 x 0.14 mm2, 1 m
符合标准
防护等级		acc. DIN EN 60529
	连接器侧	cable models: IP54 connector models: IP65 Cable pull: IP50
气候条件		DIN EN 60068-2-3, 无凝露
辐射干扰		EN 61000-6-4:2007
抗干扰		EN 61000-6-2:2005
周围环境
环境温度		-30 ... 70 °C (-22 ... 158 °F)
工作温度		cable, flexing: -5 ... 70 °C (-23 ... 158 °F), cable, fixed: -30 ... 70 °C (-22 ... 158 °F) connector models: -30 ... 70 °C (-22 ... 158 °F)
储存温度		-30 ... 70 °C (-22 ... 158 °F)
相对湿度		98 % , no moisture condensation
机械特性
拉绳直径		0.55 mm
弯曲半径		min. 14 mm
Breaking force		min. 330 N
材料
	外壳	不锈钢，镀镍
	Cable pull	plastic , Lexan 920
	法兰	铝
	Rope	不锈钢1.4401/316
生命周期		up to 106Cycles

产品
ECA10TL - Analog Cable pull rotary encoder Cable pull rotary encoder with analog interface, Solid yet lightweight plastic construction, Compact, slim design (the shaft of the mounted rotary encoder is used to provide the function of the drum bearing), Coupling-free adaptation, Wide range of mounting options, Rust and acid-resistant measuring cable
ECN10TL-* Cable pull Cable pull, Solid yet lightweight plastic construction, Compact, slim design (the shaft of the flange-mounted rotary encoder is used to provide the function of the drum bearing), Coupling-free adaptation, Multitude of mounting possibilities, Rust and acid-resistant measuring cable
ECN20IL-* Cable pull Cable pull, Robust aluminum drum housing, Compact design, Bellows with steel tip, Wide range of mounting options, Up to 5 m of measuring cable
ECN30PL-* Cable pull Cable pull, Robust aluminum drum housing, Drum travel when cable retracted using threaded spindle, Bellows with steel tip, Wide range of mounting options, Comprehensive accessories
ECN40HD-* Cable pull Cable pull, Open cable pull system, Up to 20 m of measuring cable, Measuring cable diameter of 2 mm, Drum with grooving (Lebus spooling) to increase service life and accuracy, Ball joint as standard cable attachment point allows the attachment point to move with various degrees of freedom and prevents the measuring cable from kinking
SL3050-X1/GS190 Cable pull Cable pull, Direct length and position measurement, High accuracy of measurement, Simple installation, Sturdy construction, Long lifetime